Coil unwinder SAR800 – 1250

The coil unwinder SAR was developed as a cable supplier which delivers material from big coils without pulling force. Due to the contact-free-processing sag control, the isolation hose of the material cannot be damaged.

The material coil is lifted up by a pneumatic lift table (optionally) and positioned by the operator onto the two drive shafts. One of the drive shafts can be moved motorized (optional) to lift down the coil slowly into the unwinder unit. For fixation, the tapered brackets are pushed into the center holes. This enables the user to process also damaged wood and plastic coils.

Optionally, the unwinding speed can be controlled and optimized for the production flow by the sag control DHS1000 D or by the cable accumulator system KSP/LSP.

Technical data





Drive motor:

three-phase motor

three-phase motor

three-phase motor


max. 2.0 m/s

max. 2.0 m/s

max. 2.0 m/s


1800 mm

2000 mm

2300 mm


1760 mm

1920 mm

1980 mm


1320 mm

1440 mm

1510 mm

Coil diameter / min:

400 mm

500 mm

600 mm

Coil diameter / max:

800 mm

1000 mm

1250 mm

Coil width / max:

510 mm

710 mm

890 mm

Coil weight / max:

500 kg

500 kg

500 kg

Compressed air supply with optional lifting device

optional 10 bar

optional 10 bar

optional 10 bar

Power supply:

3 x 400 V, 50-60 Hz, 16 A

3 x 400 V, 50-60 Hz, 16 A

3 x 400 V, 50-60 Hz, 16 A

Adjustable axis:





270 kg

320 kg

410 kg

© 2018 ELCAB solutions. All Rights Reserved.