Prefeeder ZG400 B2

In addition to the product group ZG200 B2, the pre-feeder ZG400 B2 has been developed for larger formatted material (cable, cords, hoses etc.) with coil weights of up to 300 kg. By means of the ZG400 B2, the material can fluently be feeded to the downstream cutting or stripping process. The material is transported by two synchronically running, coated toothed belts. Fine, rough as well as non-circular material can be processed powerful but gentle with a speed up to 1.35 m/s.

For processing twisted or rigid wire, the DHS1000 D optical wire sag control unit is an ideal supplement to the ZG400 B2 pre-feeder. The DHS-sensors measure continuously the wire sag and pass forward the according feed rate.

A smooth run of the coils needs to be assured.

Due to its controller for the upper belt, the ZG400 B2 is able to process pressure-sensitive material safely and without damage.

Accessorily available is an applicable stand (as shown in the picture).

Technical data


Servo, 640 W


max 1.35 m/s

Length (incl. dancer arm):

1100 mm


480 mm


550 mm

Feeding height:

30 mm

Feeding width:

30 mm

Discharge height with optional base stand:

1090 mm

Max. coil weight:

300 kg

Unit weight:

68 kg

Compressed air supply:

3 bar / 43.5 psi

Power supply:

230 V / 50-60 Hz

© 2018 ELCAB solutions. All Rights Reserved.